Htc P3600 upgrade to wm6 error 270

[Pabark]

HI
Help Please
I have just tried to upgrade to WM6 it went to 1% then error 270 image file corrupted ,
have re tried 4 times all same is there a way I can recover from this or is it now dead

Regards
Peter

[boz]

Hi Peter, I have moved your post into the correct thread for the Trinity.

Upgrade error number 270 means that the bootloader is not correct for the rom you are trying to flash, have you installed Hard SPL 1.20 to your device before attempting to upgrade, and could you tell me which rom you are trying to flash to your device?

Try a hard reset first off and see if that brings it back.

[Pabark]

Originally Posted by boz

Hi Peter, I have moved your post into the correct thread for the Trinity.

Upgrade error number 270 means that the bootloader is not correct for the rom you are trying to flash, have you installed Hard SPL 1.20 to your device before attempting to upgrade, and could you tell me which rom you are trying to flash to your device?

Try a hard reset first off and see if that brings it back.

Hi Boz
No I did not install Hard Sp1.20 the rom is Schaps Wms pro Trinty 4.30, Have done a hard reset get multi colour sceen (thanks for moving it to the correct thread )
Regards
Peter

[boz]

Do you mean a tri colour screen?

[Pabark]

Originally Posted by boz

Do you mean a tri colour screen?

Hi Yes

[boz]

I would try putting the device into bootloader mode and then connect to activesync and flash an original rom and radio to your device. Have a look at the Trinity guide here for more details. If this works you can then install Hard SPL 1.20 before flashing to the rom you require. Let me know how you get on.

[Pabark]

Originally Posted by boz

I would try putting the device into bootloader mode and then connect to activesync and flash an original rom and radio to your device. Have a look at the Trinity guide here for more details. If this works you can then install Hard SPL 1.20 before flashing to the rom you require. Let me know how you get on.

Hi Boz
I can get the phone into bootloader mode. but phone will not connect to activesync so I am stuck
less I can find a utilty to overwrite corrupted image file if there is one!!!
Peter

[neilm]

It doesn't need to connect to ActiveSync- bootloader is a much more 'primitive' system that connects via simple USB (make sure its direct and not via a hub)

So, with the device in Bootloader, and connected via USB, run the ROMUpdateUtility for the original ROM, and it should run through. You may need to try it a couple of times.

[Pabark]

Originally Posted by neilm

It doesn't need to connect to ActiveSync- bootloader is a much more 'primitive' system that connects via simple USB (make sure its direct and not via a hub)

So, with the device in Bootloader, and connected via USB, run the ROMUpdateUtility for the original ROM, and it should run through. You may need to try it a couple of times.

Hi Neilm
I have tried this with no luck when I run ROMUpdateUtility I get the same error code 270
the utility run very fast to 100% then same 270 error image file corrupted .
Regards
Peter

[boz]

Have you tried this a few times or just once?